Uwugwebe njani umgangatho weT8 ikhonkco lokunyusela

Xa ukhetha iT8-level lift chain, unokugweba umgangatho ngokujonga ukuba umphezulu ugudileyo, ingaba ikhonkco elimnyama liye laphela, nokuba ukuchwetheza kucacile, umkhondo wentonga ye-ejector, ukufana kwe-welding, kunye nokuba uhlobo lwekhonkco lunama-angles aphezulu naphantsi. Ukuphazamiseka okuthe tye akufuneki kudlule ii-degrees ezingama-30.

Itsheyini yokunyusela ibakala le-T8 yenye yezinto ezisetyenziswa ngokuqhelekileyo zokunyusa. Xa ukhetha, ukuze uthenge i-slings ethembekileyo kunye nekhwalithi ephezulu, ngaphezu kokubhekisela kumandla omenzi, imigangatho yemveliso kunye nezinye iireferensi zekhredithi, sinokujonga kwakhona Yenza isigwebo esilula esisekelwe kumphezulu wekhonkco ukugqiba ukuba umgangatho wayo ulungile.

Ezona ndlela ziphambili zezi zilandelayo:

1. Khangela ukuba umphezulu wekhonkco lekhonkco (nokuba lizinki, limnyama okanye likhazimlisiwe) ligudile kwaye akufuneki libe nemingxuma.

2. Ukuba yitsheyini yokuphakamisa emnyama, unganxiba iiglavu ezimhlophe, kwaye usule ikhonkco ukujonga ukuba liphelile na, ukuba kukho into emnyama kwiiglavu, okanye kukho i-oyile eninzi. Ikhonkco elimnyama elilungileyo kufuneka libe mnyama ocwebezelayo. Kukhanya, kwaye umphezulu ucoceke kakhulu, uneoli encinci, kwaye akukho mbala okanye umbala omncinci ophelayo.

3. Ukuchwetheza makucace.

4. Kufuneka kungabikho zimpawu zicacileyo zokutyhala kwindawo yentonga yokutyhala.

5. Isikhundla se-welding yi-welding port. I-welding kule ndawo kufuneka ilingane kwaye i-burrs kufuneka isuswe ngokucocekileyo. Isikhundla se-welding akufanele sisuswe. Kufuneka ibe sembindini wekhonkco lekhonkco, hayi phezulu okanye ezantsi.

6. Uhlobo lwekhonkco alukwazi ukuba nee-angles eziphezulu okanye eziphantsi okanye elinye icala liphezulu kwaye elinye liphantsi.

7. Ukunyaniseka kwamatyathanga okuphakamisa amandla aphezulu. Ngokuqhelekileyo, i-twist yekhonkco ayinakudlula i-30 degrees xa ikhonkco imile.