Hand chain hoists play an important role in bundling and transporting reactors

The hand chain hoist plays an important role in lifting operations, but its function is far more than that. In addition to lifting, the hand Chain Hoist often plays an important role in rigging and tightening, especially in the transportation of some large equipment. At this time, the hand chain hoist can be used as a tightening device to ensure the safety of the binding.

There is a great risk when the reactor is transported, because the structure of most reactors is cylindrical. Once the road is bumpy during transportation, the reactor can easily roll to the ground, causing serious injuries. loss, so it is usually necessary to use steel wire ropes to tie the reactor when transporting it. However, it is difficult to tighten the chain with bare hands. At this time, the hand chain hoist becomes a heavy tightening tool.

In the task of transporting the reactor, the hand chain hoist is generally arranged on one side of the reactor, close to the fixed point where the steel wire rope is connected to the vehicle. The upper hook of the hand chain hoist is used to hook the eye of the steel wire rope, and the lower hook is connected to the vehicle. At the fixed point on the chain hoist, just like lifting operations, tighten the binding strength little by little by pulling the chain of the chain hoist until the entire wire rope is fully tightened.

The reason why the chain hoist is qualified for this job is due to the strong reverse self-locking ability of the chain hoist, because every time the chain hoist is pulled and tightened, the ratchet and pawl will be completed under the reverse force. Engage to complete locking. This is a chain hoist whose work content is not simple.