Bazuwar tsarin ɗagawa da bincike na ƙa'ida na hawan sarkar hannu

Na farko, tsarin tsarinsarkar sarka

Sarkar sarkar hannu inji ce da ke amfani da ikon hannu don ɗaga kaya. Babban tsarinsa ya ƙunshi sassa masu zuwa:

1. Hannu

Hannun shine sashin kulawa na sarkar sarkar, wanda ke amfani da ka'idar lever don yin aikin ɗagawa na sarkar sarkar.

2.Kwayoyin hannu

Dabarar sarkar hannu ita ce tushen wutar lantarki ta hawan sarkar hannu. Lokacin da aka kunna hannu da hannu, dabaran sarkar hannun kuma za ta juya.

3.Sprocket

Sprocket wani bangare ne na hawan sarkar hannu, kuma an kafa sarkar a kan sprocket.

4.Dagawa ƙugiya

Ƙigilar ɗagawa wani maɓalli ne na sarƙoƙin sarƙoƙi, wanda ta inda za a iya ɗaga kaya da saukar da kaya.

5. Munduwa

Munduwa yana haɗa hannu da sprocket kuma wani muhimmin sashi ne na sarrafa motsin sarkar.

6. Sarkar

Sarkar tana haɗa ƙugiya mai ɗagawa da dabaran sarƙar hannu tare, kuma shine ɓangaren ƙarshe na hawan sarkar hannu wanda zai iya kammala aikin ɗagawa.

Na biyu, ka'idar ingantawa

Sarkar sarkar hannu ta dogara da ka'idar lever na ƙarfin ɗan adam don ɗaga kaya, kuma yana canza nauyi zuwa ƙarfin ɗagawa don kammala aikin ɗagawa. Hannun yana motsa sprocket don jujjuya ta cikin sprocket na hannu, kuma sarkar tana ɗagawa ko rage ƙugiya mai ɗagawa ƙarƙashin jagorancin sprocket, ta haka ta ɗaga kayan.

Na uku, aikace-aikace da taka tsantsan

Sarkar sarkar hannu kayan aikin inji ne da ake amfani da shi sosai wajen samar da masana'antu. Yana da haske, mai amfani, mai sauƙin aiki, kuma yana iya ɗaukar abubuwa masu nauyi cikin sauri da aminci. Har ila yau, hawan sarkar hannu suma suna da yawa a cikin rayuwar yau da kullun, alal misali, ana iya amfani da su wajen ƙaura, tsaftacewa, da dai sauransu, amma yayin amfani da shi, kuna buƙatar kula da abubuwa masu zuwa:

1. Ba za a iya wuce gona da iri ba

Matsakaicin nauyin hawan sarkar hannu yana da iyaka, wanda ba za a iya wuce shi ba, in ba haka ba za a iya samun haɗari mai tsanani.

2. Ya kamata a gyara shi da igiyoyi

Lokacin ɗaga abubuwa masu nauyi, ana buƙatar amfani da igiyoyi don adana kayan don guje wa haɗarin da rashin daidaituwar kaya ke haifarwa.

3. Tsaftace sarkar sarkar tsafta

Ana buƙatar tsabtace sarƙoƙin hannu da sauri bayan amfani da su don kula da kyakkyawan aikinsu da rayuwar sabis.

4. Kulawa na yau da kullun

Don tsawaita rayuwar sarkar hannu da tabbatar da aikinta na yau da kullun, ya zama dole a kai a kai bincika da kuma kula da kowane bangare na sarkar hannun, kamar lubrication, duba matse kowane dunƙule, da dai sauransu.

A takaice, hawan sarkar hannu kayan aikin inji ne da aka saba amfani da shi. A lokacin amfani, muna bukatar mu kula da aminci, da hankali shirya da load iya aiki, da kuma dace tsabta da kuma kula da shi don tabbatar da al'ada aiki da kuma kawo ƙarin saukaka ga mu samar da rayuwa.