How to wear a 15 ton hand chain hoist chain

The stage chain hoistcompletes the lifting operation through manual operation. In the process of using the Chain Hoist, the threading method of the chain is very important, which is not only related to the service life of the hand chain hoist, but also related to the work safety. Let’s talk about it below. Talk about how to thread a 15-ton hand chain hoist chain:

During the use of the 360-degree hand chain hoist, the chain will inevitably be damaged and need to be replaced. We need to prepare a new lifting chain. Before replacing the chain, we need to open the outer cover of the chain hoist, remove the broken lifting chain, and then put the new lifting chain on the chain hoist and remove the chain. Pass one end through the sprocket, then put the guide wheel and chain plate on it, and then install the wall plate and tail ring frame. The end of the chain should be placed on the tail ring frame, insert the pin, and put on the cotter pin. Then install the friction plate, ratchet plate, hand sprocket and other accessories in sequence, and install the shell, so that the hand chain hoist chain is installed.

The reverse chain is a very practical lifting equipment. The Hanma lifting Hoist Manufacturer recommends that if the chain is damaged during use, you can replace the chain according to the above steps.